Getting rid of moisture on the walls of the house
Many homes suffer from the problem of moisture appearing on the walls of the house, and this is either due to poor ventilation or lack of ventilation in the house and the lack of sunlight entering it sufficiently, perhaps because it is in the basement, and sometimes because of the presence of a house in a coastal city where the humidity is high, or the place or Cities are generally high in humidity, even if they are landlocked.
Humidity can be classified into two types:
1- Indoor humidity: – This type of dampness occurs due to washing, cleaning, bathroom water, mopping floors, and all cleaning methods in which water is used extensively.
2- External moisture: - This type of dampness occurs due to external factors such as weather, as in the case of coastal cities, especially those houses that overlook the water, or because the place is located on a low floor and does not have sufficient ventilation and sun.
How to get rid of moisture in the walls of homes?
There is more than one way to help us get rid of moisture from the walls, including: –
1- Internal insulation: - working to isolate the walls from the inside. There is more than one way to insulate the walls to prevent moisture, including the use of polystyrene sheets where they are glued to gypsum boards in this case, it is called gypsum board, and we perform the process of sticking these colors on the walls Threatened by the emergence of bricks and pasting is done using special types of adhesive that are suitable for cement walls. This method is considered one of the good ways to isolate moisture as it reflects the heat from the inside and outside according to the temperature. This method is characterized by its low cost and its work to give the walls decoration and Good view, with high physical capabilities. Walls can be insulated by lining them with colored ceramics, which completely prevents moisture penetration.
2- External insulation: - isolating the walls from the outside, including this method that is appropriate when the house is not attached from the outside to other houses. On all the walls, so that the house from the outside becomes all of stone.
3- Treating the walls: - This method is carried out in the following manner:
• Cracking the surface of the walls threatened by moisture, and thus the internal parts of the wall appear.
• Lining the wall with a layer of foam cement and rock wool, this layer becomes a heat insulator and thus works to isolate moisture.
• Instead of thermal wool and cement, polyurethane or asphalt can be used. It is used to fill the voids in the walls, then re-paint the wall or the oyster and repaint it again. It is also possible before painting to paint the wall with one of the adhesives, which is considered a moisture insulator on the walls.
Tips to prevent moisture and get rid of it if it appears.
1- Keep the house ventilated and bedding at least twice a week.
2- When cleaning the walls and the house, do not use copious water.
3- Use of moisture repellent devices.
4- In the windows with wooden shutters, take care of them and change them in case they are affected by moisture.
If you need supplies please use my Amazon and other store links from your right list on this page,best deals and no extra cost
